LG 55TC3CG-H 55" 4K UHD HDR Touchscreen Commercial Monitor User Manual
Page 68
ENGLISH
32
[PM Mode]
•
[Power Off (Default)]: Set the normal DC off mode.
•
[Sustain Aspect Ratio]: The PC retains the Extended Display Identification Data (EDID) even when the power is off.
•
[Screen Off]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), or Abnormal
Shut Down mode.
•
[Screen Off Always]: Switches to [Screen Off] status when entering DPM, Auto Power Off (15 min, 4 hours), Off
Time Scheduling, or Abnormal Shut Down mode, or when there is input from the remote control's Power button or
the monitor's Off button.
•
[Screen Off & Backlight On]: Partially turns on the backlight to keep the display at a proper temperature when in
Screen Off status.
•
[Network Ready]: Monitor is turned off, but you can control power internally through the network.
NOTE
•
In order for the screen to switch from [Screen Off] to On status, there must be input from the remote control's
Power or Input button, or the monitor's On button.
[Power On Delay](0-250)
•
This feature prevents overload by implementing a power-on delay when multiple monitor sets turn on.
•
You can set the delay interval in the range of 0 to 250 seconds.
[Power On Status]
•
Select the operating status of the monitor when the main power has turned on.
•
You can choose from among [PWR (Power On)], [STD (Standby)], [and LST (Last Status)].
•
[PWR (Power On)] keep the monitor powered on when the main power has turned on.
•
[STD (Standby)] switch the monitor to Standby status when the main power has turned on.
•
[LST (Last Status)] switches the monitor back to its previous status.
[Wake On LAN] / [Wake On LAN (Networked Standby Mode)]
•
Set whether to use [Wake On LAN] / [Wake On LAN (Networked Standby Mode)].
•
You can set the feature to On or Off for each wired/wireless network.
•
[Wired]: When set to [On], the [Wake On LAN] / [Wake On LAN (Networked Standby Mode)] feature is enabled,
letting you turn the product on remotely through a wired network.
•
[Wireless]: When set to [On], the [Wake On LAN] / [Wake On LAN (Networked Standby Mode)] feature is enabled,
letting you turn the product on remotely through a wireless network.