Planar Systems UltraRes P Series 49" UHD 4K Commercial Monitor - Manual (Page 13)

13
Planar UltraRes P Series User Manual
020-1407-02A
Page | 13
3.5 Normal Usage Guidelines
Normal use of the LCD is defined as operating in the open air to prevent heat buildup, and
without direct or indirect heat sources such as lighting fixtures, heating ducts, or direct sunlight
that can cause the displays to experience high operating temperatures. For all displays, do not
block fans or ventilation openings. If the LCD display will be installed in a recessed area with an
LCD surround or enclosure, ensure adequate openings are applied for proper air flow and
ventilation.
It is up to the installer to ensure that display placement is changed, thermal shielding is provided
and/or additional ventilation is provided to keep the display within its nominal operating
parameters. Maximum ambient operating temperatures for the Planar UltraRes P Series are:
• URP98 and URP98-ERO-T:
• 0-40°C at up to 1000 meters
• 0-35°C at up to 2000 meters
• 0-30°C at up to 3000 meters
• All other models:
• 0-40°C at up to 3000 meters
Cooling Requirements
For optimal performance, active cooling by the installer should be planned for when the ambient
temperature anywhere in the wall is predicted to be above the specified ambient temperature for
the display.
3.6 ENERGY STAR Certified
ENERGY STAR is a program run by the U.S. Environmental Protection Agency
(EPA) and U.S. Department of Energy (DOE) that promotes energy efficiency.
The following products qualify for ENERGY STAR in the factory default settings:
• URP49
• URP49-T
• URP55
• URP55-T
• URP65
• URP65-T
• URP75
• URP75-ERO-T
• URP85
• URP85-ERO-T
The factory default settings are those in which power savings will be achieved. Changing the
factory default picture settings or enabling other features will increase power consumption that
could exceed the limits necessary to qualify for ENERGY STAR rating.
For more information on the ENERGY STAR program, refer to energystar.gov .