EverFocus EMV400 - Manual (Page 13)

5
1.4 FRONT PANEL
Your primary interaction with your new DVR will be through the Front Panel buttons and their
corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as
the remainder of the manual will refer to them often.
Figure 1-1 Front Panel
1) USB
2.0: For connecting USB-Flash-Drive to copy/archive video or for firmware upgrades.
2) Audio Out: Connect to the line level input of an audio amplifier
(same output as the audio out at rear
panel, no conflict between these 2 outputs, they both can be connected simultaneously).
3) Main Monitor Out: Main monitor for live and playback display and on-screen display. (same output as
the main monitor out at rear panel, no conflict between these 2 outputs, they both can be
connected simultaneously).
4) System Status LEDs: Indicators system status.
System fail LED: HDD full, HDD/System Temperature, Fan fail
HDD fail LED: HDD power off, HDD failure
Copy: This LED ON indicates system is archiving data.