EverFocus EMV400 - Manual (Page 31)

23
3 CONFIGURATION
This chapter provides information for configuring EMV400.
3.1 CONFIGURATION OF DVR
EMV400 can be configured through On Screen Display Playback and Configuration
Connect to the “Main Mon” output with a monitor and use the mouse or the remote control to configure
menu settings.
3.2 LOGIN
In order to access EMV400 options, users may be asked to log in for authority identification. To log in,
follow these steps.
1. Right click on the screen to display the Main Menu
2. The following screen pops up:
Figure 3-1 Login page
3. Select the user name from the drop-down list and input the password. The defaults are:
User name: admin (lower case)
Password: 11111111
To input password: click the password field to bring up the on-screen keyboard (see Figure 3-2 On-screen
Keyboard). Click on each button to input the desired characters for the password. When finished, click
“
” on the on-screen keyboard to confirm the password.
+ Click on the “Login” button to log in to the system.
Chapter
3