EverFocus EMV400 User Manual
Page 16
8
○
4
GPS Data Input: Connect this connector to GPS receiver via GPS cable.
○
5
Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the
LAN jack; Green LED means network is connected, amber LED flickers when data is
being exchanged.
○
6
USB port: USB port recommended for connecting the USB mouse.
○
7
RS232 socket: Connect this connector to RS232/RS485 compatible device.
○
8
Main Monitor Out: Main monitor for live and playback display and on-screen display.
(same output as
the main monitor out at front panel, no conflict between these 2 outputs, they both can be
connected simultaneously)
○
9
Alarm Input: Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts.
○
10
Alarm Output: N.C or N.O type alarm out (form “C”).
○
11
Event Input: Reserved port.
○
12
RS485 Input: For remote control via RS-485 keyboards and telemetry control for attached PTZ devices.
○
13
802.11 b / g WiFi: Connection of the antenna.