EverFocus EMV400 - Manual (Page 78)

70
4.7.6 Alarm Server Settings
Figure 4-37 Network Menu – Alarm Server
This menu defines the parameters for communicating with a PC.
Server IP1~3: IP address of client PC. The network alarm can be transmitted to up to 3 addresses.
Protocol: Select the protocol type for alarm transmission:
UDP: User Datagram Protocol
TCP: Transmission Control Protocol
Port: Select the transmission port for network alarm messages
Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm).
Click
button to return to the previous level of menu.