Escient MP-100 - Manual (Page 110)

P AGE 110
F IRE B ALL -MP I NSTALLATION & U SER ’ S G UIDE - M22002-01A1
A PPENDIX C - M INOR T ROUBLESHOOTING
Remote LED does not blink when you press a key.
Replace the batteries with two (2) new AA alkaline batteries.
Remote LED blinks when you press a key, but home entertainment component
does not respond
•
Make sure the Remote is aimed at your home entertainment component and is not farther
than 15 feet away.
• Check that the correct mode is selected (Press FB for FireBall-MP.)
• Replace the batteries in the remote control with two (2) new AA alkaline batteries.
Remote does not control home entertainment components or commands are not
working properly
Try all listed codes for the component brands being set up. Make sure they can be operated with an
infrared remote control.