Escient MP-100 - Manual (Page 117)

P AGE 117
F IRE B ALL -MP I NSTALLATION & U SER ’ S G UIDE - M21101-
A PPENDIX D- E XTERNAL C ONTROL P ROTOCOL
function is highlighted and the selection cursor is moved over it.
Various other commands are used to mimic the operation of the remote control. Note that the command response will be “OK” as long as the
key code is a valid one, even though the system may ignore the key if the system is in a mode where the key would not normally be pro-
cessed.
Remote Button / Keyboard Commands
COMMAND
GROUP
SUB
COMMAND NUMBER
COMMAND DESCRIPTION
10 01 Left
10 02 Up
10 03 Right
10 04 Down
10 05 Select
10 06 Move To X and Y Coordinates and Select
10 The upper left point on the screen is (0,0) and the resolution of the
screen is 720 by 480 pixels.
10
10 07 Power Toggle
10 08 Power On
10 09 Power Off
10
10 10 “0”
10 11 “1”
10 12 “2”
10 13 “3”
10 14 “4”
10 15 “5”
10 16 “6”
10 17 “7”
10 18 “8”
10 19 “9”
10 20 “~”
10 21 “.”
10 22 “/”
10 23 “,”
10 24 “?”
10 25 “@”
10 26 “-“