Escient MP-100 - Manual (Page 144)

P AGE 144
F IRE B ALL -MP I NSTALLATION & U SER ’ S G UIDE - M22002-01A1
A PPENDIX H - R EMOTE C ONTROL
Re-Assigning Device Keys
The Remote can be set up to control a second TV or VCR, or any combination of eight
home entertainment components. For example, to have the Remote control a TV, a Cable
Converter, and two VCRs, you will need to reassign the unused AUX key to operate the
second VCR as follows:
1. On the Remote, press and hold CODE SET until the LED blinks twice, then release
CODE SET .
2. Enter 9 - 9 - 2. The LED will blink twice.
3. Press DVD once, then press AUX once.
4. The AUX key is now ready to be programmed for your VCR. See Programming
Component Control. To reassign other device keys, repeat steps 1 through 4 by
substituting the key sequence from the below chart for the most popular components:
To Re-Assign Key Sequence Perform
TV as VCR key: CODE SET - 9 - 9 - 2 - DVD - TV
TV as 2nd CBL key: CODE SET - 9 - 9 - 2 - CBL - TV
TV as 2nd AUX key: CODE SET - 9 - 9 - 2 - AUX - TV
TV as 2nd RCV/TNR key: CODE SET - 9 - 9 - 2 - RCV - TV
TV as AMP key: CODE SET - 9 - 9 - 2 - PP - TV
TV as CD key: CODE SET - 9 - 9 - 2 - TB - TV
TV as SAT key: CODE SET - 9 - 9 - 2 - FB - TV
2
You cannot re-assign the FB, TB,
or PP keys.
However, the keys can be used
in conjunction to re-assigning
other device keys.