Canon imagePROGRAF GP-300 - Manual (Page 111)

Note
• If the Home screen does not appear, press the HOME button. •
2. Tap Paper settings . 2.
3. Tap Advanced . 3.
4. Tap Cutting mode . 4.
5. Tap Eject cut . 5.
6. Print the job. 6.
When printing is finished, the printer will stop without cutting.
7. While holding the printed document from the bottom edge to prevent it from dropping, tap 7.
Cut paper to cut the roll paper.
Manual (when using media that cannot be cut with the cutter blade)
Note
• Once the following step has been performed, the procedure can be started from step 8 the next time. •
Printing the second and subsequent times
Printing after replacing with the same type of paper
1. Tap paper settings display area on Home screen of operation panel. 1.
111