Canon imagePROGRAF GP-300 - Manual (Page 429)

Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in
borderless printing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
• Printable Area: The area that can be printed.
• For borderless printing with roll paper, the margin is 0 in. (0 mm).
However, depending on the paper size, minor margins may be available.
Prints without Edges Based on the Scenarios
• Recommended Print Area: We recommend printing within this area.
• To match the document size with the actual printing area, print on oversize paper with the required
margin added.
Printing to Oversized Paper Sizes
Sheets
A: Top Edge
B: Bottom Edge
C: Left Edge
D: Right Edge
• Printable Area:
A margin of 0.2 in. (3 mm) on top, 0.5 in. (12.7 mm) on bottom*, and 0.2 in. (3 mm) on left and right
sides is required.
• Recommended Print Area:
A margin of 0.8 in. (20 mm) on top, 0.8 in. (20 mm) on bottom*, and 0.2 in. (3 mm) on left and right
sides is required.
* The bottom margin for cut sheet depends on an OS and applications.
429