Eurotech Appliances EWF272EL - Manual (Page 17)

17 Specifications are subject to change without notice. See owner’s manual for additional details.
Technical Data
Supply voltage: Single phase 115 V, 60 Hz
Fuse/Breaker: 15 amp minimum
Inlet supply hose: Two 5-feet (1.5 m) fill hoses (hot and cold)
Supply pressure: 15-142 PSI
Outlet hose: 5.5 feet (1.7 m) polypropylene hose, 3/4” ID
WARNING!
This appliance must be properly grounded. Refer to the owner’s manual for instructions.
Second-floor (above grade) installations must meet all local building codes.
Installation should be carried out by a qualified person who is familiar with all local codes and ordinances
for electrical and plumbing connections. Incorrect installation may cause damage and/or injury.
The machine can be installed anywhere provided that the temperature is not less than 38° F and the
electrical cords and hoses behind the machine are not cramped.
When placing the washer next to a wall or cabinet, be sure to leave 1/2” (12 mm) of space between the
washer and the wall or cabinet.
The drain outlet should be positioned at a height between 23” (584 mm) and 35” (889 mm) from the
bottom of the unit.
See pages 23—28 for stacked washer/dryer dimensions.
WASHER DIMENSIONS
EWF172 and EWF272EL
23-3/8"
594 mm
33-1/4" 845 mm
23-1/8"
587 mm
38-3/4"
984 mm
5-5/8"
143 mm
6-5/8"
168 mm
4-1/2"
102 mm
Drain
hose
3-5/8"
92 mm
Po
we
r
cord