Eurotech Appliances EWF272EL - Manual (Page 28)

28 Specifications are subject to change without notice. See owner’s manual for additional details.
The washer drain outlet should be positioned at
a height between 23” (584 mm) and 35” (889
mm) from the bottom of the unit. If possible you
should install the dryer so the condensed water
continuously flows into the drain. Refer to the
owner’s manual for instructions.
Condenser dryers work best when they have
good air circulation. If it is necessary to install
the dryer in a cabinet, be sure to leave a gap
of at least 1/2” (12 mm) on all sides. If you are
installing the pair in a closet, it is best to use
louvered doors.
The door hinges on the condenser dryer can
be reversed to make loading and unloading the
dryer more convenient. Refer to the owner’s
manual for instructions.
WARNING!
These appliances must be properly
grounded. Refer to the owner’s manual for
instructions.
Make sure the electrical cords and hoses
behind the units are not cramped.
WASHER AND CONDENSER DRYER
Opening Dimensions
Stacked Laundry Closet Installations