Epson Equity 320SX PLUS - Manual (Page 168)

Selecting Diagnostic Tests
To start a single test, press ’ or ‘ to highlight the test
category on the main menu. Then press “ or ” to highlight
the particular test in the submenu and press Enter to run it.
When a test has been completed, you see this prompt:
Press <Enter> to return
to
Main menu.
Selecting Multiple Tests
To select several tests at one time, highlight each test you
want to perform and press F3. To cancel a selection, highlight
the test and press F3 again.
To run the selected group of tests, press F6. The program
highlights each test name as it runs the test.
You can press F4 to select all tests for all devices, and press F5
to cancel all selections.
You cannot run certain tests along with other tests. The table
below lists the tests that must be run individually.
Diagnostic
tests
to be run individually
Category Test
System board Timer test
Real time clock test
Hard disk Hard disk format
Media analysis
Force bad track,
Floppy
Keyboard
Miscellaneous
Disk change line test
Scan/ASCII code test
Printer adapter test
Comm. adapter test
B-8 Performing System Diagnostics