Epson Equity 320SX PLUS - Manual (Page 30)

3. You can raise the keyboard by adjusting the legs on the
bottom. To change the angle of the keyboard, turn it over
and flip each leg upward until it locks into place, as
shown below.
6
Connecting the Mouse
Your computer has an auxiliary port for an IBM PS/2
compatible mouse that uses a miniature DIN (6-pin)
connector.
Before you connect a mouse, make sure your computer is
turned off.
If your mouse has this type of connector, you can connect it
to the built-in port on your computer. If you have a mouse
that requires a different interface port, you can connect it to
the built-in serial port or install an option card to provide the
interface.
To connect a mouse to the built-in mouse port, hold the
mouse connector so it is oriented properly with its port.
Insert the connector, marked with a mouse icon, as shown in
the following illustration.
Setting Up Your System 1-13