Eddie Bauer Enspira - Manual (Page 11)

19 18
1
Position harness straps
over the child’s shoulders.
Securing Your Child in the Child
Restraint
NOTE: Depending on your model, follow the unbuckling
and buckling steps that matches your buckle plates.
Push each buckle plate
into buckle until you hear
a “click”. Remember to
always pull up on harness
straps to make sure buckle
is locked tightly.
2
4
Pull on harness adjustment
strap to tighten harness
snugly.
NOTE: A snug strap
should not allow any slack.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
WARNING:
Failure to fasten and tighten the harness
system correctly can result in serious injury
or death.
Position the harness
retainer at mid-chest (even
with armpits), away from
the child’s neck.
3
Snap the harness retainer
together.
5
!
4358-3432E Enspira 5pt 8/6/07 4:46 PM Page 21