Eddie Bauer Enspira - Manual (Page 9)

14
Pull harness through the
harness guides from the
front.
12
From back of child
restraint, remove harness
guides by pushing down on
one edge with one hand
and pulling out from the
front side with the other.
13
14
Snap in the optional
harness guides with body
pillow into the new
harness slots.
continued on next page. 15
Rethread harness into
new harness guide
location. Make sure
harness does not twist.
15
Position headrest behind
the child’s head.
NOTE: Headrest must be
positioned above the
harness straps.
17
WARNING !
Failure to reattach the harness correctly,
can result in serious injury or death.
16
Refasten harness to
splitter plate. Make sure
harness does not twist.
10A
Lift the bottom of headrest
to determine which set of
harness guide slots works
best for your child. Adjust
if needed.
For Models Without A Body Pillow
To change harness
location:
From the back of the seat,
remove harness from
splitter plate.
11
4358-3432E Enspira 5pt 8/6/07 4:46 PM Page 17