Eddie Bauer Enspira - Manual (Page 26)

48 49
1
Reinstall Harness:
Fit the buckle strap down
through one of the three
slots in the seat. Make
sure buckle faces out.
Reinstall Harness
3
4
WARNING !
Failure to reattach the buckle and harness
correctly can result in serious injury or
death.
Thread the harness down
through slot on left side of
shell
(1) , across bottom of
seat (2) and up through
slot on right side (3) .
Thread one buckle plate
onto harness from back to
front
(4) .Thread the
harness retainer (5) . Do
the same to the other
harness end. Make sure
the harness is not twisted.
Push harness ends through
upper slots in shell
(6) .
1
2
3
4
5
6
5
Fit loops on harness ends
onto the splitter plate.
Pull up on buckle to make
sure buckle’s metal plate is
completely through the
pad and shell.
WARNING !
Failure to place buckle’s metal plate
completely through pad and shell can result
in serious injury or death to the child.
From the bottom of seat,
pull buckle metal clip
completely through pad
and shell.
NOTE: The crotch strap
must be in the 1st and
2nd crotch strap slots for
rear facing (see “Preparing
Child Restraint to Fit Your
Child” section). The 3rd
slot is for forward-facing
only.
2
4358-3432E Enspira 5pt 8/6/07 4:46 PM Page 51