Viewing hardware types, Viewing the device type, Viewing the port description – Enterasys Networks FN 100 User Manual
Page 26: Viewing hardware types -10, Deled. see, Viewing the device t, Viewing the port descriptio
The FN100 Chassis View
2-10
Viewing Chassis Information
Figure 2-3. Chassis Manager Window
Viewing Hardware Types
In addition to the graphical displays described above, menu options available at
several levels provide specific information about the physical characteristics of
the FN100 and its ports.
Viewing the Device Type
Choosing the Device Type... option on the Device menu brings up a window that
describes the management device being modeled:
Figure 2-4. Device Type Window
Viewing the Port Description
Choosing the Description... option on the individual port interface menus brings
up a window that describes that interface you have selected. Depending on the
type of port you select, one of the following windows will appear:
The MIBs which provide
the FN100’s functionality
— both proprietary MIBs
and IETF RFCs — are
listed here.
MIB Components are
listed here; remember,
there’s no one-to-one
correspondence
between MIBs and
MIB Components.