Enterasys Networks FN 100 - Manual (Page 32)

The FN100 Chassis View
2-16 Managing the Hub
Out Octets The number of bytes transmitted by this interface,
expressed as a percentage of the theoretical maximum
load.
When you select this option, a Bar Graph field will be added to the interface
display area; this field is only available when Load is the selected base unit.
Rate
The count for the selected statistic during the last poll interval. The available
parameters are the same as those provided for Raw Counts. Refer to the Raw
Counts section, above, for a complete description of each parameter.
Viewing Interface Detail
The Interface Statistics window ( Figure 2-8 ) provides detailed MIB-II interface
statistical information — including counts for both transmit and receive packets,
and error and buffering information — for each individual port interface. Color-
coded pie charts also let you graphically view statistics for both received and
transmitted Unicast, Multicast, Discarded, and Error packets.
To open the Interface Statistics window:
1. In the I/F Summary window, click to select the interface for which you’d like to
view more detailed statistics.
2. Click on Detail. The appropriate I/F Statistics window will appear.
Figure 2-8. Detail Interface Statistics