Enterasys Networks FN 100 - Manual (Page 30)

The FN100 Chassis View
2-14 Managing the Hub
The following descriptive information is provided for each interface:
UpTime
The UpTime field lists the amount of time, in a days, hh:mm:ss format, that the
device has been running since the last start-up.
Index
The index value assigned to each interface on the device.
Type
The type of the interface, distinguished by the physical/link protocol(s) running
immediately below the network layer. Possible values are ethernet-csmacd (for
both standard and Fast Ethernet front panel interfaces) and PPP.
Description
A text description of the interface: Ethernet, Fast Ethernet, or Network
Management Port.
Physical Status
Displays the current physical status — or operational state — of the interface:
Online
or Offline.
Logical Status
Displays the current logical status — or administrative state — of the interface:
Up
or Down.
Interface Performance Statistics/Bar Graphs
The statistical values (and, where available, the accompanying bar graphs) to the
right of the interface description fields provide a quick summary of interface
performance. You can select the statistical value you want to display and the units
in which you want those values displayed by using the two menu fields directly
above the interface display area, as follows:
1. In the right-most menu field, click on the down arrow and select the unit in
which you wish to display the selected statistic: Load, Raw Counts, or Rate.
2. Once you have selected the base unit, click on the down arrow in the left-most
field to specify the statistic you’d like to display. Note that the options available
from this menu will vary depending on the base unit you have selected.
NOTE
Bar graphs are only available when Load is the selected base unit; if you select Raw
Counts
or Rate, the Bar Graph column will be removed from the interface display.