Extron electronic IPL T S Series - Manual (Page 30)

Connection and Configuration, cont’d
IPL T S Series • Connection and Configuration 3-6
5 . Click OK.
Figure 3-5 — Internet Protocol (TCP/IP) Properties dialog box
6 . Open a Web browser on the local PC.
7 . Enter 192.168.254.254 in the browser’s Address field and press the Enter key.
The IPL T S unit’s embedded Web page is displayed.
8 . Click the Configuration tab.
9 . Change the IP Address and Subnet Mask fields to the desired IP address and
subnet mask.
10 . Click the Submit button.
The new IP address and subnet mask are assigned to the device, and the Web
browser connection is immediately lost.
The device, with its new IP address and subnet mask is now ready to be
connected to your A/V network.