Emulex Printer Server - Manual (Page 32)

26 Command Reference Guide
Change Domain
Specify the name of the local network’s domain or hierarchy within a
network.
>
Server>> [set |define |change] server domain
domain_name
domain_name The printer server’s domain name, which can
contain up to 48 alphanumeric characters
including periods.
Protocols
Enable or Disable Protocols
Enable or disable individual protocols.
>
Server>> define server authorize protocol [all
|none |specific] [enabled |disabled]
all Activates all protocols.
none Disables all protocols.
specific Select a protocol to be enabled from this list:
LAT, TCP, AppleTalk, NetWare, TES, or
NetBios).
enabled After selecting a specific protocol, enter this
command to activate it. Other protocols will be
disabled.
disabled Disables a specific protocol.
NOTE: If enable or disable is not included in
command, only the specified protocol will be
enabled. All others will be disabled.