Emulex Printer Server - Manual (Page 40)

34 Command Reference Guide
Define as Remote Printer
Allow the printer server to emulate a NetWare Remote Printer.
>
Server>> [set |define |change] server netware
rprinter [enabled |disabled]
enabled Enables remote printer emulation.
disabled Disables the remote printer emulation.
Rediscover Interval
Set the RPRINTER rediscovery interval, which queries the network for
newly configured Novell print servers and starts all remote printers
found.
>
Server>> [set |define |change] server netware
rediscover minutes
minutes Enter the time in minutes between 1-14 to set
the interval for automatic rediscovery. Enter 0 to
disable automatic rediscovery. The default is 2
minutes. If the time is not specified, the printer
server will rediscover immediately.
Adjust Processing Speed
Enable NetWare PSERVER to adjust to the processing speed of the
computer.
>
Server>> define server netware fast printserver
[enabled| disabled]
enabled Use when operating PSERVER at a faster PC
speed than 4.77 MHz.
disabled Use when operating PSERVER at 4.77 MHz or
slower. Default is disabled.