Choose frame type, Display characteristics, Hoose – Emulex Printer Server User Manual
Page 38: Rame, Isplay, Haracteristics
32 Command Reference Guide
Choose Frame Type
Specify the order in which the printer server will handle NetWare frame
types.
>
Server>> [set |define |change] server netware
[default |802.2 |snap |802.3 |ethernet_II
ether_type
]
default
IPX will try 802.2, Ethernet II, 802.3, and 802.2
snap in order. The first one found will be
selected.
802.2
IPX will only look for 802.2 Ethernet frames.
snap
IPX will only look for 802.2 snap Ethernet
frames.
802.3
IPX will only look for 802.3 Ethernet frames.
ethernet_II
IPX will only look for Ethernet II frames.
ether_type
If Ethernet II is selected, the user can specify the
Ethernet type in ASCII hexadecimal characters.
For example, the NetWare default is 0x8137.
The Ethernet type is not changed if this is
omitted.
Display Characteristics
Display the printer server’s Novell NetWare characteristics.
>
Server>> [show |list] server netware