Epson PhotoPC 3100Z - Manual (Page 46)

2-16 Taking Pictures
L Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley R4C7850
Rev. C
A5 size PICTURES.FM
4/27/01 Pass 3
Note:
❏
The settings that you make in the dial position
remain when you use the time lapse feature. To change
these settings, turn the dial switch to
and make the
appropriate settings before using the time lapse feature.
❏ You cannot take TIFF files when using the time lapse
feature.
1. Secure the camera on a flat surface or tripod.
2. Remove the lens cap, turn the dial switch to ,
and turn on the camera.
3. Press the MODE CHANGE button until INTERVAL
is displayed at the top of the LCD monitor.
4. The hours, minutes, and seconds appear in the
center of the screen with the seconds highlighted.
Press the up and down arrow icon buttons to
change the value of the highlighted time unit. To
highlight a different time unit, press the left and
right arrow icon buttons.
If you wish to quickly select either the longest or
the shortest available interval, you can toggle
between 24 hours and the shortest available
interval by pressing the Max/Min button.
Note:
The shortest available interval varies depending on the
current image quality, shutter speed, audio recording,
and flash settings.
5. Once you have set the desired interval, frame the
subject in the LCD monitor and press the shutter
button to begin taking photos.
Note:
❏
The camera may turn off automatically after you
take the first picture. It automatically turns back
on to take pictures at the specified time.
❏ When using the self timer feature, the camera
takes a photo ten seconds after you press the
shutter button, then continues taking photos at
the specified time lapse interval.
6. To turn off the time lapse feature, press the
POWER button while
Int appears on the
camera’s display panel.