Epson PhotoPC 3100Z - Manual (Page 50)

2-20 Taking Pictures
L Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley R4C7850
Rev. C
A5 size PICTURES.FM
4/27/01 Pass 3
Recording audio immediately after taking
photos
To make audio recordings immediately after taking
photos, you must first make a few settings. Follow
these steps.
1. Remove the lens cap, set the dial switch to ,
and turn on the camera.
2. Press the Shot SETUP button on the back of the
camera.
Note:
For an explanation on using the buttons on the back of
the camera, see “Using the LCD monitor buttons” on
page 2-5.
3. Press the Confirmation button to select On.
4. Turn the dial switch to .
Note:
❏
To make recordings while using the time lapse
feature, turn the dial switch to
, press the
MODE CHANGE button twice, then press the
SOUND button to select On. See “Using the time
lapse feature” on page 2-15 for more information.
❏ You cannot make recordings when taking pictures
using the viewfinder.
5. Frame your subject in the LCD monitor and take
a picture.
6. The captured image is displayed on the LCD
monitor momentarily, and Rec Sound is
displayed at the right. To begin recording, press
the Rec Sound button. The camera begins
making the audio recording.
Note:
When making recordings while using the time lapse
feature, Rec Sound is not displayed and the camera
automatically records audio after the photo is taken.
7. A ten-second countdown is displayed on the
screen. You can record audio until the time runs
out by speaking into the built-in microphone on
the back of the camera. To stop recording before
ten seconds is up, press the Stop button.
Note:
When making recordings while using the time lapse
feature, Stop does not appear on the LCD monitor.