Epson PhotoPC 3100Z - Manual (Page 67)

Making Settings 4-5
R4C7850
Rev. C
A5 size MAKESET.FM
4/27/01 Pass 3
R Proof Sign-off:
K. Pipa CRE Tsutagawa
K. Pipa
CRE R. Hopley
4
Turn on the camera and press the flash button on the
top of the camera to cycle through the flash settings.
The settings appear on the display panel as shown
below.
The flash settings are as follows:
Automatic
The flash fires automatically whenever more
lighting is needed.
Red-eye reduction
The flash flickers briefly before firing to
reduce the red-eye effect in flash photos of
people. As with the Automatic setting, the
flash fires automatically whenever it’s
needed for adequate lighting.
Forced flash
The flash fires with every picture you take.
Use this setting to compensate for
backlighting; for example, when you are
facing the sun.
Flash off
The flash is disabled even when adequate
lighting is not available. Use this setting for
special effects or when using a flash is
prohibited.
Slow synchro
The camera’s shutter speed slows to enhance
the clarity of background details in the photo
when taking pictures at dawn or twilight, or
in places with an illuminated background.
Automatic (default setting)
Forced flash
Flash off
Slow synchro
(Program and Manual modes only)
Red-eye reduction