Epson Perfection 1200U - Manual (Page 13)

6
E NERGY S TAR Compliance
As an E NERGY S TAR Partner, EPSON has determined that
this product meets the E NERGY S TAR guidelines for energy
efficiency. The EPA E NERGY S TAR Office Equipment
program is a voluntary partnership with the computer and office equipment industry
to promote the introduction of energy-efficient personal computers, monitors,
printers, fax machines, scanners, and copiers in an effort to reduce air pollution caused
by power generation.
Important Safety Instructions
Read all of these instructions and save them for later reference. Follow all warnings
and instructions marked on the scanner.
■
Unplug the scanner before cleaning. Clean with a damp cloth only. Do not spill
liquid on the scanner.
■
Do not place the scanner on an unstable surface or near a radiator or heat source.
■
Do not block or cover the openings in the scanner’s cabinet. Do not insert objects
through the slots.
■
Use only the type of power source indicated on the scanner’s label.
■
Connect all equipment to properly grounded power outlets. Avoid using outlets
on the same circuit as photocopiers or air control systems that regularly switch on
and off.
■
Do not let the power cord become damaged or frayed.
■
If you use an extension cord with the scanner, make sure the total ampere rating
of the devices plugged into the extension cord does not exceed the cord’s ampere
rating. Also, make sure the total ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
■
Do not attempt to service the scanner yourself.