Epson Perfection 1200U - Manual (Page 93)

86
If your scanned image is blurred
or distorted . . .
■
Check the position and condition
of your document. Make sure the
document is placed flat against
the scanner’s document table
glass. If only part of the image is
blurred, part of your document
may be wrinkled or warped.
■
Make sure the document table
glass is clean.
■
Make sure the scanner is not
tilted or placed on an unstable or
uneven surface.
If your image scans at an angle . . .
Check the position of your source
document. It may be placed at an
angle on the document table. Align
it so the horizontal and vertical edges
are carefully aligned with the scales
on the top and side of the document
table.