Epson Perfection 1200U - Manual (Page 89)

82
If the scanner lid seems “loose” . . .
This is normal. Your scanner has a
self-adjusting cover that allows you
to place thick documents on the
document table glass without
removing the cover.
If you’re having trouble scanning
while using the optional
equipment . . .
■
Make sure the option is correctly
installed and connected to the
scanner’s option interface.
■
Make sure you select the correct
Document Source setting for the
option and your image: Auto
Document Feeder (ADF) , TPU
for neg.Film , or TPU for
pos.Film .
■
Make sure the unit is completely
closed.
■
If you’re using the transparency
unit, make sure it is turned on.
If you need to remove jammed
paper from the auto document
feeder . . .
To clear jammed paper in the
optional auto document feeder,
follow the steps below:
1. Turn off the scanner.
2. Push down the release lever to
slightly raise the feeder
mechanism and release the paper.
3. Slowly pull the jammed paper out
of the feeder mechanism. (Be
careful not to pull too hard; the
paper may tear, making it more
difficult to remove.)
release
lever