Epson Perfection 1200U - Manual (Page 18)

11
Unlock the Scanner
Before connecting the scanner to a power
source, you must release the transportation
lock, located on the side of the scanner.
Turn the transportation lock down to
the unlocked position using a coin or
similar object, as shown.
If you can’t turn the transportation lock
easily, turn the scanner on (see page 12 for
instructions); then, after the operate light
starts flashing red, turn the scanner off and try again.
Always lock the scanner carriage before transporting it;
otherwise, the scanner may be damaged. Be sure the scanner
lamp is in the home position (toward the back of the scanner).
To ensure this, always turn off the scanner before locking the
carriage.
home position
operate light