Eaton Compressor & Fabrication C-STOV-MC001-E1 - Manual (Page 39)

EATON Char-Lynn Steering Catalog C-STOV-MC001-E1 July 2006 39
Steering Control
Units—Series 20
Model Code—
Ordering
Information—
Continued
16,17 Cylinder 00 None
Relief 6J 210 bar [3050 PSI]
Valve 6V 220 bar [3190 PSI]
Setting 76 230 bar [3340 PSI]
7G 240 bar [3480 PSI]
7T 250 bar [3630 PSI]
84 260 bar [3770 PSI]
8E 270 bar [3920 PSI]
8R 280 bar [4060 PSI]
92 290 bar [4210 PSI]
9C 300 bar [4350 PSI]
18,19,20,21 Ports and AABN 4 x G 1/2 (BSP) Ports with
Mounting G 1/4 (BSP) Load Sensing Port on
Threads Side, M10 Mounting Threads
DACN 4 x 3/4 (SAE) Ports with 7/16 (SAE)
Load Sensing Port on Side,
M10 Mounting Threads
FAFN 4 x M18 (Metric) Ports with M12
(Metric) Load Sensing Port on Side,
M10 Mounting Threads
FBFN 4 x M18 (Metric) Ports with M14
(Metric) Load Sensing Port on Side,
M10 Mounting Threads
RACN* 4 x 7/8 (SAE) Ports with 7/16 (SAE)
Load Sensing Port on Side,
M10 Mounting Threads
SAFN* 4 x M22 (Metric) Ports with M12
(Metric) Load Sensing Port on Side,
M10 Mounting Threads
SBFN* 4 x M22 (Metric) Ports with M14
(Metric) Load Sensing Port on Side,
M10 Mounting Threads
18,19,20,21 Ports and DADN 4 x 3/4 (SAE) Ports with 7/16 (SAE)
Mounting Load Sensing Port on Port Face,
Threads M10 Mounting Threads
(Load AAWN 4 x G 1/2 (BSP) Ports with G 1/4
Sensing (BSP) Load Sensing Port on Port
Relief Face, M10 Mounting Threads
Only) RADN* 4 x 7/8 (SAE) Ports with 7/16 (SAE)
Load Sensing Port on Port Face,
M10 Mounting Threads
FAVN 4 x M18 (Metric) Ports with M12
(Metric) Load Sensing Port on Port
Face, M10 Mounting Threads
SAVN* 4 x M22 (Metric) Ports with M12
(Metric) Load Sensing Port on Port
Face, M10 Mounting Threads
22 Input Torque 1 Low
3 Standard (Includes Stiffer Springs)
23 Fluid Type A See Eaton Technical Bulletin 3-401
24 Special Application
Options
1 Wide Angle Deflection
V Versa Steer, Wide Angle.
25,26 Special Features AA None
27 Paints and Packaging 1 Black Paint
28 Identification 0 Eaton Product Number on
Nameplate
29 Eaton Assigned C Assigned Design Code
Design Code
*Use with 114 l/min [30 GPM]
Nos Feature Code Description Nos Feature Code Description
**Cylinder Relief
Setting recommen-
dation is 870 PSI
(60 bar) above steering
inlet/load sense
pressure.