Eaton Compressor & Fabrication C-STOV-MC001-E1 - Manual (Page 76)

76 EATON Char-Lynn Steering Catalog C-STOV-MC001-E1 July 2006
Steering System
Components
Columns
Upper Shaft End
Example—see model code page 73
Position 7-8
EJ (36 Tooth Straight Serration)
Not available with horn wire
Not Available
with Horn
Wire
.0625 : 1
3/4 -16 UNF-2A Thread
Note: Torque Nut to
41-54 Nm [30-40 lb-ft]
57,15
[2.250]
32,3 [1.31]
16,0 [.63]
20,10 [.790] Dia.
22,22 x 4,775
[.870 x .1880]
Wide Key
45,34
[1.785]
26,4 [1.04]
12,7 [.50]
.052 : 1
36 Tooth Straight Serration
21,79 [.858] Major Dia.
13/16 - 20 UNF - 2A Thread
Note: Torque Nut to
41-54 Nm [30-40 lb-ft]
For bending moment
calculation when using
Eaton wheel product
No. 209-1007, wheel rim
is 22,1 [.87] above threaded
end steering shaft.
21,82 [.859] Dia.
36 Tooth Straight Serration
21,79 [.858] Major Dia.
.052 : 1
M20 x 1,5 - 6g Thread
Note: Torque Nut to
41-54 Nm [30-40 lb-ft]
For bending moment
calculation when using
Eaton wheel product
No. 209-1007, wheel rim
is 22,1 [.87] above threaded
end steering shaft.
45,34
[1.785]
26,4 [1.04]
12,7 [.50]
21,82 [.859] Dia.
36 Tooth Straight Serration
18,59 [.732] Major Dia.
16,26 [.640]
15,2 [.60]
21,8 [.86]
45,34
[1.785] R 1,6 [.06]
Max.
Not Available
with Horn
Wire
10,9 [.43]
22,17 [.873] Dia.
30,99 [1.220]
9,48 [.373]
Dia.
Crosshole
AJ
Position 7-8
GC
Position 7-8
MJ
Position 7-8
EJ
Position 7-8
DN
Position 7-8