EMC CLARiiON 300002039 User Manual
Page 20
Requirements for the host agent, server utility, and CLI
To run the host agent, CLI, or server utility, your server must meet
the following requirements:
Run a supported version of the Solaris operating system.
Be a Sun SPARCserver, SPARCstation, or Enterprise server running
a supported revision of a Solaris operating system. For the latest
requirements see the software product release notes.
Have the EMC CLARiiON supported HBA hardware and driver
installed.
Be connected to each SP in each storage system either directly or
through a switch or hub. Each SP must have an IP connection.
For the host agent and CLI only- Be on a TCP/IP network connected
to each SP in the storage system. The TCP/IP network connection
allows the server to send LUN mapping information to the storage
system and it allows Navisphere Manager or CLI to communicate
with the storage system over the network.
Have a configured TCP/IP network connection to any remote hosts
that you will use to manage the server’s storage systems, including:
z
any server whose browser you will use to access Manager 6.X.
z
any Windows Server 2003, or Windows 2000 server running
Storage Management Server software.
z
any AIX, HP-UX, Linux, VMware ESX Server, NetWare, Solaris,
Windows Server 2003, or Windows 2000 server running the CLI.
If you want to use the CLI on the server to manage storage systems on
a remote server, the server must be on a TCP/IP network connected
to both the remote server and each SP in the remote server’s storage
system. The remote server can be running AIX, HP-UX, Linux, Solaris,
or the Windows operating system.
20
EMC CLARiiON Server Support Products for Solaris Server Installation Guide