EMC CLARiiON 300002039 - Manual (Page 44)

The CD is mounted automatically on /cdrom/admsnap, which
is linked to /cdrom/cdrom0. The following command lines use
/cdrom/cdrom0
.
If the CD does not mount automatically, then mount the CD
using the mount/dev/cdrom command.
The File Manager Admsnap window appears with
ADMSNAP.pkg
displayed.
b. Load admsnap from the CD by typing:
/usr/sbin/pkgadd —/cdrom/cdrom0/solaris/ADMSNAP.pkg
The following messages appear:
The following packages are available:
1 ADMSNAP
Navisphere Admsnap
(sparc) X.X.X.X.X
Select package(s)...to process (or "all" to process all
packages). (default: all) [?, ??, q]:
6. When prompted, enter y to install the admsnap package and y
again to continue the installation.
The installation script executes, listing the files installed, and on
completion, displays the message:
Installation of <ADMSNAP>
was successful .
The information described in the admsnap help and man pages does not
apply to servers connected to an AX100–series storage system. Use only
the admsnap commands described in this document.
7. Use the pkginfo command to verify the instal-
lation. Enter /usr/sbin/pkginfo-1 ADMSNAP
Messages similar to the following appear:
PKGINST: ADMSNAP
NAME ...
CATEGORY: application
VERSION X.X.X.X.X
PSTAMP: Navisphere: 2000:10:28:13:03:01
INSTDATE: November 20 2000 13:03
STATUS: Completely installed
FILES:
xxxxxxx
44 EMC CLARiiON Server Support Products for Solaris Server Installation Guide