EMC CLARiiON 300002039 - Manual (Page 39)

-secfilepath securityfilepath -port 443|2163 [-directory outputdirectory]
where:
-ip IPaddress
Specifies the IP address of an SP on the storage system
to which you will upload the report. You cannot use
this switch in conjunction with the -h switch.
-h IPaddress | network_name
Specifies the IP address or the network name of an SP on the
storage system to which you will upload the report. You
cannot use this switch in conjunction with the -ip switch.
-user|-u username
Specifies the login name for the storage system. You must use this
switch in conjunction with the -password|-p and -scope|-s switches.
You cannot use this switch in conjunction with the -secfilepath switch.
-password|-p userpassword
Specifies the password required for access to the storage
system. You must use this switch in conjunction with
the -user|-u and -scope|-s switches. You cannot use
this switch in conjunction with the -secfilepath switch.
-scope|-s scopelevel
Specifies the level of access this username and password has to the
storage system - 0 = global; 1 = local; 2 = LDAP. You must use this
switch in conjunction with the -user|-u and -password|-p switches.
You cannot use this switch in conjunction with the -secfilepath switch.
-secfilepath securityfilepath
Searches the security file for the specified IP address. If the utility does
not find the specified IP address, then the utility will use the
default entry in the security file.
Important : A security file is required to run this switch. For information on
how to create a security file, refer to the EMC Navisphere Command Line (CLI)
Reference guide.
EMC CLARiiON Server Support Products for Solaris Server Installation Guide 39