Efficient Networks 5100 Series - Manual (Page 25)

SpeedStream Router User Guide
Important! Username and password fields are case-sensitive. Each may consist of up to 64
alphanumeric characters. Be sure to record your user name and password. You will need to use them
when you log on again.
2. You may accept the default user name,
admin, or enter a new user name in the
User Name box.
3. Before proceeding, you must enter a
password in the New Password box; then
enter the same password in the Confirm
New Password box.
Important! Any keystroke or combination
of keystrokes can be used as a password.
For example, the Delete shortcut key
combination, CTRL+X, would be
accepted as a valid password character.
Be careful that your password does not
use the same characters as a keyboard
shortcut!
4. Select the login security level.
• Require admin login to access entire Web site:
Before you can access any window in the Web interface, you must log in with your network user
name and password. (Security level = High)
• Require admin login to access configuration pages:
Before you can access any window in the Web interface that allows you to make configuration
changes, you must log in with your network user name and password. (Security level = Medium)
• Do not require admin login:
After you log in for the first time, you will not be required to log in again at any window.
(Security level = Low)
5. Click OK. Depending on the security level you selected, one of the following windows will display:
If you chose to require admin login to access entire site, the Enter Network Password window
displays. •
• If you chose either of the other options, a confirmation window displays. Click OK to display the
System Summary window.
Entering the Network Password
If you selected either of these options in the Administrative User Setup window, you will be required to
log on again:
• Require admin login to access entire Web site
• Require admin login to access configuration pages
15