Efficient Networks 5100 Series - Manual (Page 68)

SpeedStream Router User Guide
Admin User (System Login)
►Setup | Admin User
After you have initially set your user name and password, the System Status window will display the
next time you log on to the Web interface. To change the system user name and/or password, you must
open the Administrative User Setup window from the main menu.
Change the User Name or Password
1. From the main menu, click Setup; then click Admin User.
The Administrative User Setup window
displays.
2. If you want to change the user name,
enter the new name in the User Name
box.
3. Enter the new password in both the New
Password and Confirm New Password
boxes.
4. Select the login security level:
Require admin login to access entire Web site:
Before you can access any window in the Web interface, you must log in with your network user
name and password. (Security level = High) •
•
•
Require admin login to access configuration pages:
Before you can access any window in the Web interface that allows you to make configuration
changes, you must log in with your network user name and password. (Security level = Medium)
Do not require admin login:
After you log in for the first time, you will not be required to log in again at any window.
(Security level = Low)
5. Click OK.
The System Status window displays.
Time Client
►Setup | Time Client
An accurate log timestamp is one of the requirements of the ICSA Labs firewall criteria (ver. 3.0a). In
order to maintain accurate timestamps in each log message, the firewall implements a Simple Network
Time Protocol (SNTP) client. This allows the system to automatically synchronize its date and time with
Coordinated Universal Time (UTC), the international time standard. The system date and time are set and
corrected automatically via the designated server(s).
58