Efficient Networks 5100 Series - Manual (Page 82)

SpeedStream Router User Guide
Step 3: Select a protocol to filter.
1. In the Select by Name list box, select the protocol name.
- or -
In the Select by Number text box, enter
the protocol number.
2. Depending on the protocol, select the applicable rule options:
•
•
•
ctors.
•
•
For TCP/UDP, go to Step 4a.
For ICMP, go to
Step 4b .
For any other protocol, go to Step 5.
Step 4a: If TCP/UDP chosen in Step 3, select the desired rule options.
1. Specify Source Port Operator options:
• Select the source port operator.
• Enter the first port number.
• If applicable, enter the second port
number.
2. Specify Destination Port Operator
options:
• Select the destination port operator.
• Enter the first port number.
• If applicable, enter the second port number.
• If applicable, select Apply rule only to TCP connections that are already established.
• If applicable, select Check syn
packets for TCP conne
Step 4b. If ICMP chosen in Step 3, select
the desired ICMP rule options.
From the table, select one or multiple
options.
- or -
To automatically select all options, click
All Types.
Step 5. Apply the rule definition, clear the form, or reset the form.
To accept the settings, click Apply.
72