Eurotech Appliances VIPER / VIPER-LITE PXA255 - Manual (Page 52)

VIPER Technical Manual Detailed hardware description
© 2007 Eurotech Ltd Issue E 52
J3 – LVDS MDR connector
Connector: 3M 10220-55G3PL, 20-way, 1.27mm (0.05”) Board mount Through-Hole
Right Angle Receptacle – Shielded
Mating cable: 3M 14520-EZAB-XXX-0EX, 3M™ Mini D Ribbon (MDR) Cable
Assembly)
Pin Signal name Pin Signal name
1 LVDS_D0- 11 LVDS_CLK-
2 LVDS_D0+ 12 LVDS_CLK+
3 GND 13 GND
4 GND 14 GND
5 LVDS_D2- 15 LVDS_D1-
6 LVDS_D2+ 16 LVDS_D1+
7 NC 17 NC
8 NC 18 NC
9 NC 19 LCD_EN
10 NC 20 GND
1 10
20 11
J4 – Power connector
Connector: FCI 76384-403LF, 3-way, 2.54mm (0.1”) Board mount Through-Hole
Receptacle
Mating connector: FCI 65240-003LF
Mating connector crimps: FCI 76357-401LF
Pin Signal name
1 5V
2 GND
3 12V
As viewed from the
connector pins
1 2 3