Hawking Technology HNC700PT - Manual (Page 15)

Configuration Controls
Digital Output
Click on the “On” or “Off” buttons to enable or disable the digital output.
Client Settings
Clicking on this button links you to the client setting pages. Please review the section that follows for more details.
Configuration
Only the Administrator can access camera configurations.
Camera View
The information bar at the top of the camera view displays: a. the type of connection to the network camera, and b. the
current date/time. The camera view provides not only the live video, but also a way to direct the network camera to
different targets. You can use your mouse to click on the directional buttons and direct the network camera to various
targets.
Pan/Tilt Control Buttons
The directional buttons are for Left, Right, Up, Down, and Home. The Home button centers the camera.
Go to
Once the Administrator has determined the preset positions, users can direct the camera using this control.
Pan speed
This button sets the speed of the “Left” and “Right” controls.
Tilt speed
This button sets the speed of the “Up” and “Down” controls.
Auto pan
This button commands the camera to automatically pan from the current position to the left-most and then to the right-
most positions. After panning, the camera returns to the original position.
Auto patrol
This button commands the camera to automatically patrol between the preset positions on the Patrol List, which can be
modified on the “Camera control page”. After one patrol cycle, the camera returns to the original position.
Stop
This stops the “Auto Pan” or “Auto Patrol” command.
15