Hawking Technology HNC700PT - Manual (Page 29)

proceed. If the passive mode is selected, the network camera can automatically make an attempt for active mode, if the
external FTP server does not support passive mode.
2nd FTP server: The domain name or IP address of the external FTP server.
2nd FTP user name: Assigned user name on the backup FTP server.
2nd FTP password: Assigned password on the backup FTP server.
2nd FTP remote folder: Assigned folder on the backup FTP server.
Secondary FTP passive mode: Passive mode setting for the backup FTP server.
HTTP
HTTP port: This can be something other than the default Port 80. Once the port is changed, the User must be notified of
the change for the connection to be successful. For instance, when the Administrator changes the HTTP port of the
network camera whose IP address is 192.168.0.100 from 80 to 8080, the User must type in the web browser
“http://192.168.0.100:8080” instead of “http://192.168.0.100”.
Streaming
Control channel port: This can be something other than the default port 5001 in order to work with the port opened by
the firewall.
Audio channel port: This can be something other than the default port 5002 in order to work with the port opened by the
firewall.
Video channel port: This can be something other than the default port 5003 in order to work with the port opened by the
firewall.
Improve audio quality in low bandwidth environment: If the network camera seems to work in a low bandwidth
network environment, the User can use this option to see if audio quality can be improved by sacrificing some real-time
synchronization.
Some invalid settings may cause the system to fail to respond. Change the configuration only if necessary
and consult with your network supervisor or experienced users for correct settings. If the system loses
contact, refer to Appendix A for reset and restore procedures.
29