Hawking Technology HNC700PT - Manual (Page 16)

Client Settings
At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in installation.
This plug-in has been registered for certification and can be used to change the parameters at the client’s site. The user
should click on
to install the plug-in. If the web browser does not allow the user to complete the installation,
check the Internet security to lower the security level or contact your IT or networking supervisor.
There are two settings within the Client Settings page. One is the “Media Option” for the User to determine if audio
should be muted. The other is the “Protocol Option”, which provides choices on connection protocol between client and
server. There are three protocol choices to optimize your usage: UDP, TCP and HTTP.
The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to
network burst traffic and images may be obscured.
The TCP protocol allows for less packet loss and produces a more accurate video display. The downside with this
protocol is that the real-time effect is worse than that of the UDP protocol.
16