Hand Held Products 9550 - Manual (Page 193)

Dolphin® 9500/9550 Mobile Computer User’s Guide 10 - 1
10
Dolphin 9500/9550 HomeBase
Overview
As the hub of your Dolphin 9500/9550 system, the Dolphin HomeBase charging and communication cradle supports both RS-
232 and USB communications, which make it able to interface with the majority of PC-based enterprise systems. When a terminal
is seated in the HomeBase, its main battery pack charges in less that four hours.
Power
The HomeBase completes a full charge of the main battery pack in less than four hours. The HomeBase also provides power to
the intelligent battery charging system in all Dolphin terminals that senses when a full charge has been achieved and switches
to a trickle charge to maintain the full charge.
Communications
Reliable data communications at speeds of up to 115k baud can be transmitted by the HomeBase through the RS-232 serial
port. Using the full-speed USB port, the data transmission rate goes up to 12 Mbps.
HomeBases cannot be physically connected to each other - sometimes referred to as “daisy-chained” - but can be networked
together via a serial or USB hub.
Convenient Storage
Intelligent battery charging makes the Dolphin HomeBase a safe and convenient storage receptacle for your Dolphin terminal.
Capacity
The Dolphin HomeBase holds one terminal and features an auxiliary battery well behind the terminal well that can charges a
battery pack independently of the terminal well. This means that one HomeBase can charge two battery packs: the one installed
in the terminal and a spare.
Use only Dolphin 9500 series peripherals, power cables, and power adapters. Use of peripherals, cables, or power
adapters not sold/manufactured by HHP will void the warranty and may damage the terminal.
Use only the Li-ion battery packs provided by HHP. The use of any battery pack not sold/manufactured by HHP in the
Dolphin 9500/9550 terminal will void your warranty and may result in damage to the Dolphin terminal or battery.
!
!