Powering the homebase, Powering the homebase -5, Arged battery for your dolphin terminal. see – Hand Held Products 9550 User Manual
Page 197: Ck. for more information, see
Advertising
Dolphin® 9500/9550 Mobile Computer User’s Guide
10 - 5
Powering the HomeBase
The terminal requires 9.5 Volts DC input for communications and battery charging; the HHP power cable contains a power
adapter that converts the power source voltage accordingly. Only the power adapter cable from HHP converts the voltage
appropriately.
HHP recommends that you leave the Dolphin HomeBase connected to its power source at all times, so that it is always ready to
use.
1. Connect the HHP power cable to the DC jack on the rear panel of the HomeBase.
2. Connect the HHP power cable to the power adapter.
3. Plug the power adapter cable into the power source.
4. The HomeBase is now powered.
Advertising