Hand Held Products 9550 - Manual (Page 75)

Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 7
IrDA Config
This system setting allows you to verify the IrDA port settings.
The IrDA com port can be disabled to free up a com port. This is useful if, for example, you are using a Bluetooth radio and want
to connect the terminal to additional Bluetooth devices.
To Disable the IrDA Port
1. Tap Disable IrDA ports.
2. You receive a message stating that you need to reset the terminal before the change takes effect. Tap OK.
3. Perform a soft reset; see Soft Reset (Warm Boot) on page 2-12 .
4. Go to Start > Settings > System tab > IrDA and verify that the screen says “IrDA is now DISABLED.”
Always displays the current status
of the IrDA port. Enabled is the
default.