Hand Held Products 9550 - Manual (Page 228)

13 - 2 Dolphin® 9500/9550 Mobile Computer User’s Guide
Charge/Analyze Slot
This is the fourth slot and the only one that can be used to analyze a battery. When a battery is placed in this slot, it
begins charging just as it does in the other three slots. However, if you press the ANALYZE button, it runs the battery
in this slot through the complete Analyze cycle. For more information, see
Using the Battery Analyzer on page 13-4.
Battery Capacity Indicator LEDS
These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For more
information, see
Battery Capacity Indicator LEDS on page 13-2.
Analyze Button
Press this button to start a battery analyze cycle. For more information, see Using the Battery Analyzer on page 13-4 .
Status LEDs
A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the
batteries in its slot.
Rear Panel
Power Switch
Toggle the power switch to turn the QuadCharger on and off.
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input voltages
between 90-265 volts.
Status LED color This color indicates that the battery in the slot…
Green Has completed its charge cycle and is ready for use.
Orange Is being charged at a maximum charge rate.
Red Encountered an error during the most recent charge cycle.
1 2 3 4
Swc
O CHARGE/ANAL YZE
0%
AL YZE
LO T 4 TT ERY
P A CIT Y
0%
Power Supply Connector Power Switch Status LED