Hand Held Products 9550 - Manual (Page 89)

Dolphin® 9500/9550 Mobile Computer User’s Guide 5 - 21
Name Servers settings Tap on this tab to determine how the terminal connects to servers. Server-assigned IP addresses use
DHCP.
Work Settings
When configuring work settings, make sure that you are prepared with dial-up numbers and other necessary numbers from you
office network or internet service provider (ISP).
To access work settings, navigate to the Connections screen (Start > Settings > Connections tab > Connections), select Work
Settings in the second drop-down list.
There are four tabs for work settings: General, Modem, VPN, and Proxy Settings.
General tab The General tab for Work Settings functions the same way it does for Internet Settings; for more
information, see page
5-17 .
Modem tab The Modem tab for Work Settings functions the same way it does for Internet Settings; for more
information, see
To Configure Internet Settings on page 5-18 .
VPN tab The VPN tab enabled you to create virtual private network for your work settings.
Proxy Server tab The Proxy Server tab enables you to connect to the internet via a proxy server.
You can
• Use the server-assigned IP address
(recommended) OR
• Enter a specific server address in the
fields provided:
• DNS and Alt DNS - enter the
domain name server address to
locate the appropriate domain. If
the domain can’t be found, the Alt
DNS is tried automatically.
• WINS and Alt WINS - enter the
appropriate IP address to locate
the desired server on the
windows network. If the server
can’t be found, the Alt WINS
address is tried automatically.
Tap OK to save settings.