D. clear space, H. outside air (optional), F. fixed glass assembly – Hearth and Home Technologies Hearth&Home Fireplace BV4236DBI User Manual

Page 9: E. decorative doors and fronts, C. fan kit (optional), I. ipi battery tray/battery installation

Advertising
background image

9

Hearth & Home Technologies • BV4236DBI, BV4842DBI • 2209-900 Rev. N • 9/12

D. Clear Space

WARNING! DO NOT place combustible objects in front

of the fireplace or block louvers.

High temperatures may

start a fire. See Figure 2.2.
Avoid placing candles and other heat-sensitive objects on

mantel or hearth. Heat may damage these objects.

Figure 2.2 Clear Space

H. Outside Air (optional)

The outside air kit supplies some fresh combustion air for

your fireplace. It may help reduce the effects of negative

air pressure. (See Section 9.A.)
• Refer to Figure 9.2 for location of control.
• Close the inlet to prevent cold drafts when the fireplace

is not being used.

CAUTION! Risk of Burns! The outside air control handle

is HOT when fireplace is in operation. Adjust BEFORE

lighting fire.

F. Fixed Glass Assembly

See Section 14.I.

E. Decorative Doors and Fronts

WARNING! Risk of Fire! Install ONLY doors or fronts

approved by Hearth & Home Technologies. Unapproved

doors or fronts may cause fireplace to overheat.
This fireplace has been supplied with an integral

barrier to prevent direct contact with the fixed glass

panel. DO NOT operate the fireplace with the barrier

removed.
Contact your dealer or Hearth & Home Technologies if

the barrier is not present or help is needed to properly

install one.
For more information refer to the instructions supplied with

your decorative door or front.

G. Remote Controls, Wall Controls and Wall

Switches

Follow the instructions supplied with the control installed

to operate your fireplace:

CLEAR SP

ACE

3 FT

. IN FRONT OF FIRE

PLACE

For safety:
• Install a switch lock or a wall/remote control with child

protection lockout feature.

• Keep remote controls out of reach of children.
See your dealer if you have questions.

C. Fan Kit (optional)

If desired, a fan kit may be added. Contact your dealer to

order the correct fan kit.

I. IPI Battery Tray/Battery Installation

The IntelliFire Plus

TM

system has a battery backup option.

Battery longevity and performance will be affected by the

service temperatures of this appliance.
NOTICE: Batteries should only be used as a power source

in the event of an emergency such as an outage.

Advertising